Measuring for Fit – A Quick Guide
Here’s how to measure your toilet correctly to confirm compatibility with our bidet seat and attachments:
Bidet Seat Measurement Guide
ROUND TYPE
1. The distance from the toilet seat fixing holes to the toilet tank must be at least 5 cm
2. The distance between the toilet seat fixing holes should be 12–20 cm
3. The distance from the toilet seat fixing holes to the front edge of the toilet bowl should be 40–46 cm
4. The overall length of the toilet, from the back to the front edge, must be at least 50 cm
ELONGATED TYPE
1. The distance from the toilet seat fixing holes to the toilet tank must be at least 5 cm
2. The distance between the toilet seat fixing holes should be 12–20 cm
3. The distance from the toilet seat fixing holes to the front edge of the toilet bowl should be 42–48 cm
4. The overall length of the toilet, from the back to the front edge, must be at least 53.5 cm
PRODUCT DIMENSION
Water & Electricity
-Water inlet is on the left-hand side when facing the toilet
-The 1.5m power cord is on the right-hand side. Please ensure there is a
power point within 1.5m
-If the tap is inside the tank, or on the right side with the toilet back to the
wall, please request an alternate fitting at checkout
-All installation fittings are included in the box
Compatible Toilet Types
Most bidets sold by Bidets Online are designed to suit standard Australian floor-mounted toilets. These include:
Close-coupled toilets
Back-to-wall toilets
Open-back toilets with visible plumbing
Standard rim and rimless designs
Please note that wall-hung or concealed cistern toilets may require special attention. These setups can still be compatible, but you may need longer hoses or extensions.
If you’re unsure, take a photo and email it to our team, and we’ll advise you on the best fit.
